Home / Products
The catalog
31 products in four ranges, all sharing one parts bin. Start with the range, or filter by what you move.
48 h stocked parts7–10 days typical lead time
Most specified Pumps · Standard HC Series end-suction centrifugal pump NEW The workhorse of the range: back pull-out design, ANSI B73.1 dimensions, 42 hydraulic sizes.
- Flow range
- 10 – 4,500 gpm
- Max. head
- up to 720 ft
Pumps · Heavy duty HCX heavy-duty process pump ANSI/ASME B73.1 process pump for corrosive and abrasive duties, with reverse-vane impeller.
- Flow range
- 20 – 6,000 gpm
- Max. head
- up to 800 ft
Pumps · Hazardous area MG magnetic-drive sealless pump Zero-leak pumping for toxic, flammable and high-value fluids. No mechanical seal to maintain.
- Flow range
- 5 – 1,200 gpm
- Max. head
- up to 500 ft
Valves · Standard BV Series full-port ball valve Two- and three-piece bodies, blow-out-proof stem, ISO 5211 mounting pad for actuation.
- Size range
- 1/4" – 12"
- Pressure rating
- Class 150 / 300, up to 2,000 psi WOG
Valves · Heavy duty CV globe control valve Cage-guided control valve with quick-change trim, pneumatic or electric actuation, and smart positioner.
- Size range
- 1/2" – 16"
- Pressure rating
- Class 150 – 1500
Filtration · Heavy duty AF automatic self-cleaning filter Continuous filtration down to 25 µm with no interruption of flow and no consumables.
- Flow range
- 50 – 10,000 gpm
- Filtration
- 25 – 3,000 µm
Have a duty point? Skip the filters.
Send fluid, flow and head; an application engineer returns a sized selection and curve within one business day.
Controls & monitoring · Standard EM electromagnetic flow meter No moving parts, no pressure loss, ±0.2% accuracy on conductive liquids.
- Size range
- 1/2" – 48"
- Accuracy
- ±0.2 % of reading
Pumps · Hazardous area DP air-operated double-diaphragm pump Self-priming, dry-run safe, ATEX-rated. Handles solids to 3/4" and viscous slurries.
- Flow range
- up to 260 gpm
- Pressure rating
- up to 125 psi
Pumps · Standard MD motor-driven metering pump Diaphragm metering pump for chemical dosing with ±1% steady-state accuracy.
- Flow range
- 0.1 – 120 gph
- Pressure rating
- up to 1,500 psi
Pumps · Sanitary PD rotary lobe pump Gentle, low-shear transfer of viscous and shear-sensitive products. 3-A and EHEDG certified.
- Flow range
- 0.5 – 900 gpm
- Pressure rating
- up to 200 psi
Pumps · Heavy duty SP submersible sump and effluent pump Vortex and channel impellers for pits and lift stations, with float or level-sensor control.
- Flow range
- up to 1,800 gpm
- Max. head
- up to 120 ft
Pumps · Standard VM vertical multistage pump Compact in-line multistage pump for boosting, boiler feed and reverse-osmosis supply.
- Flow range
- 2 – 550 gpm
- Max. head
- up to 1,000 ft
Valves · Standard BF resilient-seated butterfly valve Wafer and lug styles with a replaceable elastomer seat; bubble-tight shutoff to 250 psi.
- Size range
- 2" – 24"
- Pressure rating
- up to 250 psi
Valves · Standard CK swing check valve Flanged swing check with bolted bonnet, renewable seat and optional outside lever and weight.
- Size range
- 2" – 24"
- Pressure rating
- Class 150 / 300
Valves · Sanitary DV sanitary diaphragm valve Forged 316L bodies with Ra 0.4 µm finish for pharmaceutical and biotech process lines.
- Size range
- 1/2" – 4"
- Pressure rating
- up to 150 psi
Valves · Heavy duty HP double-offset high-performance butterfly valve Metal or soft seats for steam, hot oil and high-cycle control duty.
- Size range
- 3" – 36"
- Pressure rating
- Class 150 / 300 / 600
Valves · Heavy duty KV knife gate valve Bi-directional knife gate for slurries, pulp and wastewater with a replaceable resilient seat.
- Size range
- 2" – 36"
- Pressure rating
- up to 150 psi
Valves · Standard PR pilot-operated pressure-reducing valve Maintains constant downstream pressure regardless of demand; globe or angle pattern.
- Size range
- 1-1/2" – 16"
- Pressure rating
- up to 400 psi inlet
Valves · Hazardous area SV spring-loaded safety relief valve ASME Section VIII certified relief valves for steam, gas and liquid. Set pressures to 6,000 psi.
- Size range
- 1/2" – 8"
- Pressure rating
- set 5 – 6,000 psi
Filtration · Standard BH bag filter housing Single and multi-bag housings with swing-bolt covers for fast bag changes.
- Flow range
- up to 1,800 gpm
- Pressure rating
- up to 150 psi
Filtration · Standard BS simplex basket strainer Large-capacity basket for high dirt loads; quick-opening cover for cleaning without tools.
- Size range
- 2" – 12"
- Pressure rating
- Class 125 / 150
Filtration · Sanitary CH sanitary cartridge housing Electropolished 316L housings for 10" to 40" cartridges in beverage, pharma and electronics water.
- Cartridges
- 1 – 22 × 10" to 40"
- Pressure rating
- up to 150 psi
Filtration · Heavy duty DS duplex basket strainer Two baskets, one diverter valve: clean one side while the other stays on line.
- Size range
- 3/4" – 12"
- Pressure rating
- up to 300 psi
Filtration · Standard YS Y-strainer Protects pumps, meters and valves from pipe scale and debris. Perforated or mesh screens.
- Size range
- 1/4" – 24"
- Pressure rating
- Class 125 – 600
Controls & monitoring · Standard EA quarter-turn electric actuator On/off and modulating actuators for ball and butterfly valves, 24 V to 480 V.
- Torque
- 300 – 20,000 in-lb
- Supply
- 24 VDC, 120 / 240 / 480 VAC
Controls & monitoring · Hazardous area HX hazardous-area pump package Explosion-proof motor, mag-drive pump, instrumentation and local control for Class I Division 1 areas.
- Area classification
- Class I Div 1 / ATEX Zone 1
- Flow range
- 5 – 600 gpm
Controls & monitoring · Standard LS vibrating-fork level switch Point level detection in liquids regardless of density, foam or coating.
- Output
- Relay, PNP/NPN, NAMUR
- Temperature range
- -40 to 300 °F
Controls & monitoring · Hazardous area PA rack-and-pinion pneumatic actuator Double-acting and spring-return actuators with NAMUR interface for solenoids and positioners.
- Torque
- 70 – 50,000 in-lb
- Supply pressure
- 40 – 120 psi
Controls & monitoring · Standard PS pump control panel Duplex and triplex panels with VFD, soft-start or across-the-line starters and level control.
- Pumps
- 1 – 4
- Motor rating
- up to 200 hp each
Controls & monitoring · Standard SK chemical dosing skid Pre-engineered dosing packages: pumps, calibration column, pulsation dampener, relief and back-pressure valves.
- Pumps
- 1 or 2 × MD metering
- Flow range
- 0.1 – 240 gph
Controls & monitoring · Heavy duty WS packaged booster system Multi-pump variable-speed booster for buildings, irrigation and process water.
- Flow range
- up to 3,000 gpm
- Pressure rating
- up to 300 psi